diff --git a/.config/doom/config.el b/.config/doom/config.el index 44a6c6e..292fc7d 100644 --- a/.config/doom/config.el +++ b/.config/doom/config.el @@ -49,9 +49,15 @@ (map! :leader :desc "Load new theme" "h t" #'counsel-load-theme) -;; (require 'elfeed-goodies) -;; (elfeed-goodies/setup) -;; (setq elfeed-goodies/entry-pane-size 0.5) +(require 'elfeed-goodies) +(elfeed-goodies/setup) +(setq elfeed-goodies/entry-pane-size 0.5) +(evil-define-key 'normal elfeed-show-mode-map + (kbd "J") 'elfeed-goodies/split-show-next + (kbd "K") 'elfeed-goodies/split-show-prev) +(evil-define-key 'normal elfeed-search-mode-map + (kbd "J") 'elfeed-goodies/split-show-next + (kbd "K") 'elfeed-goodies/split-show-prev) (setq elfeed-feeds (quote (("https://www.reddit.com/r/linux.rss" reddit linux) ("https://www.reddit.com/r/commandline.rss" reddit linux) diff --git a/.config/doom/config.org b/.config/doom/config.org index 364ece1..c75edef 100644 --- a/.config/doom/config.org +++ b/.config/doom/config.org @@ -130,9 +130,15 @@ Setting the theme to doom-one. To try out new themes, I set a keybinding for co An RSS newsfeed reader for Emacs. #+BEGIN_SRC emacs-lisp -;; (require 'elfeed-goodies) -;; (elfeed-goodies/setup) -;; (setq elfeed-goodies/entry-pane-size 0.5) +(require 'elfeed-goodies) +(elfeed-goodies/setup) +(setq elfeed-goodies/entry-pane-size 0.5) +(evil-define-key 'normal elfeed-show-mode-map + (kbd "J") 'elfeed-goodies/split-show-next + (kbd "K") 'elfeed-goodies/split-show-prev) +(evil-define-key 'normal elfeed-search-mode-map + (kbd "J") 'elfeed-goodies/split-show-next + (kbd "K") 'elfeed-goodies/split-show-prev) (setq elfeed-feeds (quote (("https://www.reddit.com/r/linux.rss" reddit linux) ("https://www.reddit.com/r/commandline.rss" reddit linux) diff --git a/.config/fish/config.fish b/.config/fish/config.fish index 164baf9..6746609 100644 --- a/.config/fish/config.fish +++ b/.config/fish/config.fish @@ -7,6 +7,7 @@ # My fish config. Not much to see here; just some pretty standard stuff. ### EXPORT ### +set -e fish_user_paths set -U fish_user_paths $HOME/.local/bin $HOME/Applications $fish_user_paths set fish_greeting # Supresses fish's intro message set TERM "xterm-256color" # Sets the terminal type diff --git a/.config/nitrogen/bg-saved.cfg b/.config/nitrogen/bg-saved.cfg index 2cc5c72..d3edc22 100644 --- a/.config/nitrogen/bg-saved.cfg +++ b/.config/nitrogen/bg-saved.cfg @@ -1,14 +1,14 @@ [xin_0] -file=/home/dt/wallpapers/0253.jpg +file=/home/dt/wallpapers/wp4049315.jpg mode=0 bgcolor=#000000 [xin_1] -file=/home/dt/wallpapers/0253.jpg +file=/home/dt/wallpapers/wp4049315.jpg mode=0 bgcolor=#000000 [xin_2] -file=/home/dt/wallpapers/0253.jpg +file=/home/dt/wallpapers/wp4049315.jpg mode=0 bgcolor=#000000 diff --git a/.config/nitrogen/nitrogen.cfg b/.config/nitrogen/nitrogen.cfg index 6af2042..b53286a 100644 --- a/.config/nitrogen/nitrogen.cfg +++ b/.config/nitrogen/nitrogen.cfg @@ -1,8 +1,8 @@ [geometry] -posx=0 -posy=20 -sizex=1920 -sizey=1060 +posx=8 +posy=28 +sizex=1900 +sizey=1040 [nitrogen] view=icon diff --git a/.config/picom/picom.conf b/.config/picom/picom.conf index 4913b40..855f532 100755 --- a/.config/picom/picom.conf +++ b/.config/picom/picom.conf @@ -4,102 +4,25 @@ # | |_| || | http://www.gitlab.com/dwt1/ # |____/ |_| # -# My picom-jonaburg-git config. Not much to see here; just some pretty standard stuff. -# Note: I use animations and blurring but I commented out rounded corners because -# some programs that I wanted to exclude from rounded corners refused to follow the rules. +# My config. Not much to see here; just some pretty standard stuff. -################################# -# Animations # -################################# -# requires https://github.com/jonaburg/picom -# (These are also the default values) -transition-length = 200 -transition-pow-x = 0.1 -transition-pow-y = 0.1 -transition-pow-w = 0.1 -transition-pow-h = 0.1 -size-transition = true - - -################################# -# Corners # -################################# -# requires: https://github.com/sdhand/compton or https://github.com/jonaburg/picom -# corner-radius = 10.0; -# rounded-corners-exclude = [ -# #"window_type = 'normal'", -# "window_type = 'dock'", -# "class_g = 'awesome'", -# "class_g = 'URxvt'", -# "class_g = 'XTerm'", -# "class_g = 'kitty'", -# "class_g = 'Polybar'", -# #"class_g = 'Emacs'", -# "class_g = 'code-oss'", -# "class_g = 'firefox'", -# "class_g = 'Thunderbird'" -# ]; -# round-borders = 1; -# round-borders-exclude = [ -# "class_g = 'Emacs'" -# ]; - -################################# -# Shadows # -################################# - - -# Enabled client-side shadows on windows. Note desktop windows +# Enabled client-side shadows on windows. Note desktop windows # (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, # unless explicitly requested using the wintypes option. # -# shadow = false shadow = true; # The blur radius for shadows, in pixels. (defaults to 12) -# shadow-radius = 12 -shadow-radius = 7; +shadow-radius = 8; # The opacity of shadows. (0.0 - 1.0, defaults to 0.75) -# shadow-opacity = .75 +shadow-opacity = .75 # The left offset for shadows, in pixels. (defaults to -15) -# shadow-offset-x = -15 -shadow-offset-x = -7; +shadow-offset-x = 1; # The top offset for shadows, in pixels. (defaults to -15) -# shadow-offset-y = -15 -shadow-offset-y = -7; - -# Avoid drawing shadows on dock/panel windows. This option is deprecated, -# you should use the *wintypes* option in your config file instead. -# -no-dock-shadow = false - -# Don't draw shadows on drag-and-drop windows. This option is deprecated, -# you should use the *wintypes* option in your config file instead. -# -# no-dnd-shadow = false - -# Red color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-red = 0 - -# Green color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-green = 0 - -# Blue color value of shadow (0.0 - 1.0, defaults to 0). -# shadow-blue = 0 - -# Do not paint shadows on shaped windows. Note shaped windows -# here means windows setting its shape through X Shape extension. -# Those using ARGB background is beyond our control. -# Deprecated, use -# shadow-exclude = 'bounding_shaped' -# or -# shadow-exclude = 'bounding_shaped && !rounded_corners' -# instead. -# -# shadow-ignore-shaped = '' +shadow-offset-y = 1; # Specify a list of conditions of windows that should have no shadow. # @@ -117,21 +40,6 @@ shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ]; -# Specify a X geometry that describes the region in which shadow should not -# be painted in, such as a dock window region. Use -# shadow-exclude-reg = "x10+0+0" -# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on. -# -# shadow-exclude-reg = "" - -# Crop shadow of a window fully on a particular Xinerama screen to the screen. -# xinerama-shadow-crop = false - - -################################# -# Fading # -################################# - # Fade windows in/out when opening/closing and when opacity changes, # unless no-fading-openclose is used. @@ -155,21 +63,9 @@ fade-exclude = [ "class_g = 'slop'" # maim ] -# Do not fade on window open/close. -# no-fading-openclose = false - -# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc. -# no-fading-destroyed-argb = false - - -################################# -# Transparency / Opacity # -################################# - - # Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0) -# inactive-opacity = 1 -inactive-opacity = 0.8; +# inactive-opacity = 0.8 +inactive-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default) # frame-opacity = 1.0 @@ -202,17 +98,6 @@ focus-exclude = [ "class_g = 'slop'" # maim ]; -# Use fixed inactive dim value, instead of adjusting according to window opacity. -# inactive-dim-fixed = 1.0 - -# Specify a list of opacity rules, in the format `PERCENT:PATTERN`, -# like `50:name *= "Firefox"`. picom-trans is recommended over this. -# Note we don't make any guarantee about possible conflicts with other -# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows. -# example: -# opacity-rule = [ "80:class_g = 'URxvt'" ]; -# -# opacity-rule = [] opacity-rule = [ "100:class_g = 'XTerm'", "100:class_g = 'URxvt'", @@ -220,294 +105,12 @@ opacity-rule = [ "100:class_g = 'Thunderbird'" ]; - -################################# -# Background-Blurring # -################################# - - -# Parameters for background blurring, see the *BLUR* section for more information. -# blur-method = -# blur-size = 12 -# -# blur-deviation = false - -# Blur background of semi-transparent / ARGB windows. -# Bad in performance, with driver-dependent behavior. -# The name of the switch may change without prior notifications. -# -# blur-background = true; - -# Blur background of windows when the window frame is not opaque. -# Implies: -# blur-background -# Bad in performance, with driver-dependent behavior. The name may change. -# -# blur-background-frame = false; - - -# Use fixed blur strength rather than adjusting according to window opacity. -# blur-background-fixed = false; - - -# Specify the blur convolution kernel, with the following format: -# example: -# blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"; -# -# blur-kern = '' -# blur-kern = "3x3box"; - -blur: { - # requires: https://github.com/ibhagwan/picom - method = "kawase"; - #method = "kernel"; - strength = 7; - # deviation = 1.0; - # kernel = "11x11gaussian"; - background = false; - background-frame = false; - background-fixed = false; - kern = "3x3box"; -} - -# Exclude conditions for background blur. -blur-background-exclude = [ - #"window_type = 'dock'", - #"window_type = 'desktop'", - #"class_g = 'URxvt'", - # - # prevents picom from blurring the background - # when taking selection screenshot with `main` - # https://github.com/naelstrof/maim/issues/130 - "class_g = 'slop'", - "_GTK_FRAME_EXTENTS@:c" -]; - - -################################# -# General Settings # -################################# - -# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers. -# daemon = false - -# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`. -# `xrender` is the default one. -# -experimental-backends = true; -backend = "glx"; -#backend = "xrender"; - - -# Enable/disable VSync. -# vsync = false -vsync = true - -# Enable remote control via D-Bus. See the *D-BUS API* section below for more details. -# dbus = false - -# Try to detect WM windows (a non-override-redirect window with no -# child that has 'WM_STATE') and mark them as active. -# -# mark-wmwin-focused = false -mark-wmwin-focused = true; - -# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused. -# mark-ovredir-focused = false -mark-ovredir-focused = true; - -# Try to detect windows with rounded corners and don't consider them -# shaped windows. The accuracy is not very high, unfortunately. -# -# detect-rounded-corners = false -detect-rounded-corners = true; - -# Detect '_NET_WM_OPACITY' on client windows, useful for window managers -# not passing '_NET_WM_OPACITY' of client windows to frame windows. -# -# detect-client-opacity = false -detect-client-opacity = true; - -# Specify refresh rate of the screen. If not specified or 0, picom will -# try detecting this with X RandR extension. -# -# refresh-rate = 60 -refresh-rate = 0 - -# Limit picom to repaint at most once every 1 / 'refresh_rate' second to -# boost performance. This should not be used with -# vsync drm/opengl/opengl-oml -# as they essentially does sw-opti's job already, -# unless you wish to specify a lower refresh rate than the actual value. -# -# sw-opti = - -# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, -# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, -# provided that the WM supports it. -# -# use-ewmh-active-win = false - -# Unredirect all windows if a full-screen opaque window is detected, -# to maximize performance for full-screen windows. Known to cause flickering -# when redirecting/unredirecting windows. paint-on-overlay may make the flickering less obvious. -# -# unredir-if-possible = false - -# Delay before unredirecting the window, in milliseconds. Defaults to 0. -# unredir-if-possible-delay = 0 - -# Conditions of windows that shouldn't be considered full-screen for unredirecting screen. -# unredir-if-possible-exclude = [] - -# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows -# in the same group focused at the same time. -# -# detect-transient = false -detect-transient = true - -# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same -# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if -# detect-transient is enabled, too. -# -# detect-client-leader = false -detect-client-leader = true - -# Resize damaged region by a specific number of pixels. -# A positive value enlarges it while a negative one shrinks it. -# If the value is positive, those additional pixels will not be actually painted -# to screen, only used in blur calculation, and such. (Due to technical limitations, -# with use-damage, those pixels will still be incorrectly painted to screen.) -# Primarily used to fix the line corruption issues of blur, -# in which case you should use the blur radius value here -# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`, -# with a 5x5 one you use `--resize-damage 2`, and so on). -# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly. -# -# resize-damage = 1 - -# Specify a list of conditions of windows that should be painted with inverted color. -# Resource-hogging, and is not well tested. -# -# invert-color-include = [] - -# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer. -# Might cause incorrect opacity when rendering transparent content (but never -# practically happened) and may not work with blur-background. -# My tests show a 15% performance boost. Recommended. -# -# glx-no-stencil = false - -# GLX backend: Avoid rebinding pixmap on window damage. -# Probably could improve performance on rapid window content changes, -# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.). -# Recommended if it works. -# -# glx-no-rebind-pixmap = false - -# Disable the use of damage information. -# This cause the whole screen to be redrawn everytime, instead of the part of the screen -# has actually changed. Potentially degrades the performance, but might fix some artifacts. -# The opposing option is use-damage -# -# no-use-damage = false -#use-damage = true (Causing Weird Black semi opaque rectangles when terminal is opened) -#Changing use-damage to false fixes the problem -use-damage = false - -# Use X Sync fence to sync clients' draw calls, to make sure all draw -# calls are finished before picom starts drawing. Needed on nvidia-drivers -# with GLX backend for some users. -# -# xrender-sync-fence = false - -# GLX backend: Use specified GLSL fragment shader for rendering window contents. -# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` -# in the source tree for examples. -# -# glx-fshader-win = '' - -# Force all windows to be painted with blending. Useful if you -# have a glx-fshader-win that could turn opaque pixels transparent. -# -# force-win-blend = false - -# Do not use EWMH to detect fullscreen windows. -# Reverts to checking if a window is fullscreen based only on its size and coordinates. -# -# no-ewmh-fullscreen = false - -# Dimming bright windows so their brightness doesn't exceed this set value. -# Brightness of a window is estimated by averaging all pixels in the window, -# so this could comes with a performance hit. -# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0) -# -# max-brightness = 1.0 - -# Make transparent windows clip other windows like non-transparent windows do, -# instead of blending on top of them. -# -# transparent-clipping = false - -# Set the log level. Possible values are: -# "trace", "debug", "info", "warn", "error" -# in increasing level of importance. Case doesn't matter. -# If using the "TRACE" log level, it's better to log into a file -# using *--log-file*, since it can generate a huge stream of logs. -# -# log-level = "debug" -log-level = "info"; - -# Set the log file. -# If *--log-file* is never specified, logs will be written to stderr. -# Otherwise, logs will to written to the given file, though some of the early -# logs might still be written to the stderr. -# When setting this option from the config file, it is recommended to use an absolute path. -# -# log-file = '/path/to/your/log/file' - -# Show all X errors (for debugging) -# show-all-xerrors = false - -# Write process ID to a file. -# write-pid-path = '/path/to/your/log/file' - -# Window type settings -# -# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard: -# "unknown", "desktop", "dock", "toolbar", "menu", "utility", -# "splash", "dialog", "normal", "dropdown_menu", "popup_menu", -# "tooltip", "notification", "combo", and "dnd". -# -# Following per window-type options are available: :: -# -# fade, shadow::: -# Controls window-type-specific shadow and fade settings. -# -# opacity::: -# Controls default opacity of the window type. -# -# focus::: -# Controls whether the window of this type is to be always considered focused. -# (By default, all window types except "normal" and "dialog" has this on.) -# -# full-shadow::: -# Controls whether shadow is drawn under the parts of the window that you -# normally won't be able to see. Useful when the window has parts of it -# transparent, and you want shadows in those areas. -# -# redir-ignore::: -# Controls whether this type of windows should cause screen to become -# redirected again after been unredirected. If you have unredir-if-possible -# set, and doesn't want certain window to cause unnecessary screen redirection, -# you can set this to `true`. -# wintypes: { normal = { fade = false; shadow = true; } tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; }; - dock = { shadow = true; } - dnd = { shadow = false; } + dock = { shadow = false; } + dnd = { shadow = true; } popup_menu = { opacity = 0.8; } dropdown_menu = { opacity = 0.8; } }; diff --git a/.config/qtile/README.org b/.config/qtile/README.org index fcfc55a..b861f75 100644 --- a/.config/qtile/README.org +++ b/.config/qtile/README.org @@ -712,10 +712,10 @@ floating_layout = layout.Floating(float_rules=[ # default_float_rules include: utility, notification, toolbar, splash, dialog, # file_progress, confirm, download and error. ,*layout.Floating.default_float_rules, - Match(title='Confirmation'), # tastyworks exit box - Match(title='Qalculate!'), # qalculate-gtk - Match(wm_class='kdenlive'), # kdenlive - Match(wm_class='pinentry-gtk-2'), # GPG key password entry + Match(title='Confirmation'), # tastyworks exit box + Match(title='Qalculate!'), # qalculate-gtk + Match(wm_class='kdenlive'), # kdenlive + Match(wm_class='pinentry-gtk-2'), # GPG key password entry ]) auto_fullscreen = True focus_on_window_activation = "smart" diff --git a/.config/qtile/autostart.sh b/.config/qtile/autostart.sh index 71f9125..f443c0d 100755 --- a/.config/qtile/autostart.sh +++ b/.config/qtile/autostart.sh @@ -1,12 +1,8 @@ #!/usr/bin/env bash -# -# Using bash in the shebang rather than /bin/sh, which should -# be avoided as non-POSIX shell users (fish) may experience errors. lxsession & -picom --experimental-backends & +picom & nitrogen --restore & -urxvtd -q -o -f & /usr/bin/emacs --daemon & volumeicon & nm-applet & diff --git a/.config/qtile/config.py b/.config/qtile/config.py index 982ecc9..e91eb03 100644 --- a/.config/qtile/config.py +++ b/.config/qtile/config.py @@ -570,10 +570,10 @@ floating_layout = layout.Floating(float_rules=[ # default_float_rules include: utility, notification, toolbar, splash, dialog, # file_progress, confirm, download and error. *layout.Floating.default_float_rules, - Match(title='Confirmation'), # tastyworks exit box - Match(title='Qalculate!'), # qalculate-gtk - Match(wm_class='kdenlive'), # kdenlive - Match(wm_class='pinentry-gtk-2'), # GPG key password entry + Match(title='Confirmation'), # tastyworks exit box + Match(title='Qalculate!'), # qalculate-gtk + Match(wm_class='kdenlive'), # kdenlive + Match(wm_class='pinentry-gtk-2'), # GPG key password entry ]) auto_fullscreen = True focus_on_window_activation = "smart" diff --git a/.xmonad/README.org b/.xmonad/README.org index 1f34ef4..a878b59 100644 --- a/.xmonad/README.org +++ b/.xmonad/README.org @@ -171,7 +171,7 @@ myStartupHook :: X () myStartupHook = do spawnOnce "lxsession &" spawnOnce "nitrogen --restore &" - spawnOnce "picom --experimental-backends &" + spawnOnce "picom &" spawnOnce "nm-applet &" spawnOnce "volumeicon &" spawnOnce "trayer --edge top --align right --widthtype request --padding 6 --SetDockType true --SetPartialStrut true --expand true --monitor 1 --transparent true --alpha 0 --tint 0x282c34 --height 22 &" diff --git a/.xmonad/xmonad.hs b/.xmonad/xmonad.hs index ad42924..186432a 100644 --- a/.xmonad/xmonad.hs +++ b/.xmonad/xmonad.hs @@ -117,7 +117,7 @@ myStartupHook :: X () myStartupHook = do spawnOnce "lxsession &" spawnOnce "nitrogen --restore &" - spawnOnce "picom --experimental-backends &" + spawnOnce "picom &" spawnOnce "nm-applet &" spawnOnce "volumeicon &" spawnOnce "trayer --edge top --align right --widthtype request --padding 6 --SetDockType true --SetPartialStrut true --expand true --monitor 1 --transparent true --alpha 0 --tint 0x282c34 --height 22 &"