Merge branch 'main' into sequoia-development

CHANGELOG.md

@@ -12,6 +12,11 @@
 - Implement new Copy on Write detection mechanism for all file copying operations
   - Implemented using `getattrlist` and `VOL_CAP_INT_CLONE` flag
   - Helps improve performance on APFS volumes
+- Increase model range for S1X/S3X patching to include Haswell Macs and `MacPro6,1`
+  - Helps avoid an issue where older machines with newer, unsupported SSDs would fail to boot
+  - Only affects building EFI from another machine
+- Resolve AMD Navi MXM GPU detection for modded iMac9,x-12,x
+  - Thanks @Ausdauersportler for the patch!
 - Increment Binaries:
   - PatcherSupportPkg 1.6.3 - release
 

docs/MODELS.md

@@ -1,9 +1,25 @@
 # Supported Models
+
+### Application requirements
+The patcher application requires **OS X Yosemite 10.10** or later to run.
+* **OS X El Capitan 10.11** or later is required to make installers for macOS Ventura and later.
+
+The patcher is designed to target **macOS Big Sur 11.x to macOS Sonoma 14.x**.
+* Other versions may work, albeit in a broken state. No support is provided for any version outside of the above.
+
+-------
+
 Any Intel-based Mac listed below can install and make use of OpenCore Legacy Patcher. To check your hardware model, open System Information and look for the `Model Identifier` key.
 * This applies even if Apple supports the model natively.
 * OpenCore Legacy Patcher does not support PowerPC- or Apple Silicon-based Macs.
 * If your model is not listed below, it is not supported by this patcher.
 
+::: warning Note
+It is **extremely recommended** to update your Mac to its latest native version before using OpenCore Legacy Patcher, to ensure you're on the highest firmware.
+:::
+
+
+
 The below tables can be used to reference issues with a particular model, and see which OS would work best on your machine.
 * [MacBook](#macbook)
 * [MacBook Air](#macbook-air)
@@ -13,14 +29,6 @@ The below tables can be used to reference issues with a particular model, and se
 * [Mac Pro](#mac-pro)
 * [Xserve](#xserve)
 
-::: details OpenCore Patcher application
-The patcher application requires **OS X Yosemite 10.10** or later to run.
-* **OS X El Capitan 10.11** or later is required to make installers for macOS Ventura and later.
-
-The patcher is designed to target **macOS Big Sur 11.x to macOS Sonoma 14.x**.
-* Other versions may work, albeit in a broken state. No support is provided for any version outside of the above.
-:::
-
 
 ### MacBook
 

docs/TROUBLESHOOTING.md

@@ -8,6 +8,7 @@ Here are some common errors that users may experience while using this patcher:
 * [Cannot boot macOS without the USB](#cannot-boot-macos-without-the-usb)
 * [Infinite Recovery OS Booting](#infinite-recovery-os-reboot)
 * [Stuck on boot after root patching](#stuck-on-boot-after-root-patching)
+* ["Unable to resolve dependencies, error code 71" when root patching](#unable-to-resolve-dependencies-error-code-71-when-root-patching)
 * [Reboot when entering Hibernation (`Sleep Wake Failure`)](#reboot-when-entering-hibernation-sleep-wake-failure)
 * [How to Boot Recovery through OpenCore Legacy Patcher](#how-to-boot-recovery-through-opencore-legacy-patcher)
 * [Stuck on "Your Mac needs a firmware update"](#stuck-on-your-mac-needs-a-firmware-update)
@@ -104,7 +105,30 @@ cd "/Volumes/Macintosh HD - Data/Library/Extensions" && ls | grep -v "HighPoint*
 
 Then restart and now your system should be restored to the unpatched snapshot and should be able to boot again.
 
+## "Unable to resolve dependencies, error code 71" when root patching
 
+If you're getting this error, it typically means you have some offending kernel extensions, to fix this you will have to clear them.
+
+Semi-automated way:
+
+1. Open Terminal
+2. Type `sudo zsh`
+3. Type `cd "/Volumes/Macintosh HD/Library/Extensions" && ls | grep -v "HighPoint*\|SoftRAID*" | xargs rm -rf`
+   * Make sure to rename "Macintosh HD" to what your drive name is
+4. Run OCLP root patcher again
+   
+Manual way:
+
+1. Navigate to /Library/Extensions
+2. Delete everything **except** HighPointIOP.kext, HighPointRR.kext and SoftRAID.kext
+3. Run OCLP root patcher again
+
+If there is no success, navigate to "/Library/Developer/KDKs" and delete everything.
+
+If still no success, type `sudo bless --mount "/Volumes/Macintosh HD/" --bootefi --last-sealed-snapshot` 
+* Make sure again to rename "Macintosh HD" to what your drive name is
+
+Run OCLP root patcher again.
 
 ## Reboot when entering Hibernation (`Sleep Wake Failure`)
 

opencore_legacy_patcher/efi_builder/graphics_audio.py

@@ -142,11 +142,15 @@ class BuildGraphicsAudio:
         iMac MXM dGPU Backlight DevicePath Detection
         """
 
-        if not self.constants.custom_model and self.computer.dgpu and self.computer.dgpu.pci_path:
+        if not self.constants.custom_model:
             for i, device in enumerate(self.computer.gpus):
                     logging.info(f"- Found dGPU ({i + 1}): {utilities.friendly_hex(device.vendor_id)}:{utilities.friendly_hex(device.device_id)}")
                     self.config["#Revision"][f"Hardware-iMac-dGPU-{i + 1}"] = f"{utilities.friendly_hex(device.vendor_id)}:{utilities.friendly_hex(device.device_id)}"
 
+                    # Work-around for AMD Navi MXM cards with PCIe bridge
+                    if not self.computer.dgpu:
+                        self.computer.dgpu=self.computer.gpus[i]
+
                     if device.pci_path != self.computer.dgpu.pci_path:
                         logging.info("- device path and GFX0 Device path are different")
                         self.gfx0_path = device.pci_path

opencore_legacy_patcher/efi_builder/storage.py

@@ -150,9 +150,10 @@ class BuildStorage:
 
         # Restore S1X/S3X NVMe support removed in 14.0 Beta 2
         # Apple's usage of the S1X and S3X is quite sporadic and inconsistent, so we'll try a catch all for units with NVMe drives
+        # Additionally expanded to cover all Mac models with the 12+16 pin SSD layout, for older machines with newer drives
         if self.constants.custom_model and self.model in smbios_data.smbios_dictionary:
             if "CPU Generation" in smbios_data.smbios_dictionary[self.model]:
-                if cpu_data.CPUGen.broadwell <= smbios_data.smbios_dictionary[self.model]["CPU Generation"] <= cpu_data.CPUGen.kaby_lake:
+                if (cpu_data.CPUGen.haswell <= smbios_data.smbios_dictionary[self.model]["CPU Generation"] <= cpu_data.CPUGen.kaby_lake) or self.model in [ "MacPro6,1" ]:
                     support.BuildSupport(self.model, self.constants, self.config).enable_kext("IOS3XeFamily.kext", self.constants.s3x_nvme_version, self.constants.s3x_nvme_path)
 
         # Apple RAID Card check
@@ -193,4 +194,4 @@ class BuildStorage:
 
         if self.constants.apfs_trim_timeout is False:
             logging.info(f"- Disabling APFS TRIM timeout")
-            self.config["Kernel"]["Quirks"]["SetApfsTrimTimeout"] = 0
+            self.config["Kernel"]["Quirks"]["SetApfsTrimTimeout"] = 0

opencore_legacy_patcher/sys_patch/kernelcache/kernel_collection/support.py

@@ -107,7 +107,6 @@ class KernelCacheSupport:
         return updated_install_location
 
 
-
     def clean_auxiliary_kc(self) -> None:
         """
         Clean the Auxiliary Kernel Collection

opencore_legacy_patcher/sys_patch/sys_patch.py

@@ -405,9 +405,9 @@ class PatchSysVolume:
                             destination_folder_path = str(self.mount_location_data) + install_patch_directory
 
                         updated_destination_folder_path = kc_support_obj.add_auxkc_support(install_file, source_folder_path, install_patch_directory, destination_folder_path)
-
+                        if updated_destination_folder_path != destination_folder_path:
-                        if kc_support_obj.check_kexts_needs_authentication(install_file) is True:
+                            if kc_support_obj.check_kexts_needs_authentication(install_file) is True:
-                            self.constants.needs_to_open_preferences = True
+                                self.constants.needs_to_open_preferences = True
 
                         if destination_folder_path != updated_destination_folder_path:
                             # Update required_patches to reflect the new destination folder path