# Installing UEFI Windows 10

* Guide based off of [cdf's Mac Pro Thread](https://forums.macrumors.com/threads/opencore-on-the-mac-pro.2207814/)

To install UEFI is actually super simple! All it requires is to boot Windows' Installer through OpenCore to force a UEFI setup. Here we'll be going a bit more step by step in the process including partitioning and such.

* Note: UEFI Windows is generally quite usable for Arrendale and newer models, however machines with Penryn CPUs may experience issues
* Recommended Models:
  * MacBookAir4,x and newer
  * MacBookPro8,x and newer
  * Macmini5,x and newer
  * iMac11,x and newer
  * MacPro4,1 and newer
  * Xserve3,1 and newer

Once you know your model is supported, you're good to go with the rest of this guide

## Disk Formatting

To start off, we'll need the following:

* An 8GB USB drive for the Windows Installer
* Minimum of 30GB of free space on whatever drive you want to install Windows too

First, lets format out drives as follows:

### USB Drive Formatting

Open Disk Utility in macOS and format the USB Drive as ExFat with MBR Scheme:

![](../images/windows-mbr-format.png)

### Disk Formatting

Next, grab the drive you wish to install Windows on and partition it as ExFat (If formatting entire drive, ensure it's GUID Partition Table):

![](../images/windows-partition-1.png)

If you plan to use the same hard drive for macOS and Windows, we recommend creating a dedicated partition just for OpenCore. This lets Windows have the ESP to itself and OpenCore can stay within it's own bubble.

Recommended size is 200MB and the partition format **must** be FAT32 for OpenCore to operate correctly. You will next want to install OpenCore onto the new partition, either moving from the ESP with [MountEFI](https://github.com/corpnewt/MountEFI) or rerunning the OpenCore-Patcher.app

* Note: For machines with dedicated drives for Windows, having different partitions for OpenCore is not required
* Note 2: We recommend uninstalling OpenCore from the ESP/EFI Partition when you create this new OpenCore partition to avoid confusion when selecting OpenCore builds in the Mac's boot picker

![](../images/windows-partition-2.png)

## Creating the Installer

First up, lets grab Windows's Installer at the below link:

* [Download Windows 10 Disc Image (ISO File)](https://www.microsoft.com/en-ca/software-download/windows10ISO)

Next, mount the Windows 10 ISO:

![](../images/windows-iso.png)

The open terminal and run `rsync` on the USB drive (replace CCCOMA_X64 with the mounted ISO's name, as well as replacing W10USB with your USB drive's name):

```
rsync -r -P /Volumes/CCCOMA_X64/ /Volumes/W10USB
```

![](../images/rsync-progess.png)

Command will take some time, so sit back and get some coffee. Once finished, the root of the USB drive should look as follows:

* Ensure that these folders and files are on the root, otherwise the USB will not boot

![](../images/windows-rsync-done.png)

Once done, lets reboot into OpenCore's Menu and you'll see a new Windows' entry:

* Note: Do not boot the installer outside of OpenCore as this will default back to the old MBR BIOS setup. Booting through OpenCore ensures Windows uses UEFI

![](../images/oc-windows.png)

From there, install Windows as normal and you'll get a new BootCamp entry in OpenCore's picker when done!

* Don't forget to run BootCamp's utilities installer as well to ensure Wifi and such are functioning correctly. This can be downloaded from the BootCamp Assistant app in macOS

![](../images/oc-windows-done.png)

## Troubleshooting

### iMac12,x Bluescreen after driver installation

Currently Intel's iGPU drivers for the HD 3000 series do not support UEFI booting in Windows. Recommended solution is to simply disable: [iMac 12,1 Windows 10 Boot Loop – Fix Intel Graphics issue](https://zzq.org/?p=39)