2.9 KiB
Troubleshooting
Here are some common errors users may experience while using this patcher:
- Stuck on
This version of Mac OS X is not supported on this platform - Cannot boot macOS without the USB
- Infinite Recovery OS Booting
- Reboot when entering Hibernation (
Sleep Wake Failure) - Booting with a non-flashed GPU
Stuck on This version of Mac OS X is not supported on this platform
This means macOS has detected a SMBIOS it does not support, to resolve this ensure you're booting OpenCore before the macOS installer in the boot picker. Reminder the option will be called EFI Boot
Once you've booted OpenCore at least once, your hardware should now auto boot it until either NVRAM reset or you remove the drive with OpenCore installed.
Cannot boot macOS without the USB
By default, the OpenCore Patcher won't install OpenCore onto the internal drive itself during installs. Instead, you'll need to either manually transfer OpenCore to the internal drive's EFI or run this patcher's Option 2 again but select your internal drive.
Reminder that once this is done, you'll need to select OpenCore in the boot picker again for your hardware to remember this entry and auto boot from then on.
Infinite Recovery OS Booting
With OpenCore Legacy Patcher, we rely on Apple Secure Boot to ensure OS updates work correctly and reliably with Big Sur. However this installs NVRAM variables that will confuse your Mac if not running with OpenCore. To resolve, simply uninstall OpenCore and reset NVRAM.
- Note: Machines with modded root volumes will also result in infinite recovery until integrity is restored
Reboot when entering Hibernation (Sleep Wake Failure)
Known issue on some models, temporary fix is to disable Hibernation:
sudo pmset -a hibernatemode 0
Booting with a non-flashed GPU
For Mac Pro, Xserve and iMac users with non-flashed GPUs, you can still easily boot OpenCore and view the entire boot process. To do so, make sure SIP is disabled(to allow NVRAM write access) and run the following:
sudo bless --verbose --file /Volumes/VOLNAME/EFI/OC/OpenCore.efi --folder /Volumes/VOLNAME/EFI/OC --setBoot
- Note you will need to replace
VOLNAMEwith the Volume name of your USB or hard drive with OpenCore - Note 2: Once done, you can re-enable SIP
Once you boot OpenCore for the first time, LauncherOption will install itself as the top boot priority making OpenCore always launch. Combined with RequestBootVar, all boot options must go through OpenCore ensuring seamless usage even with OS installation and updates.